Analog-way QuickMatriX Uživatelský manuál Strana 36
- Strana / 87
- Tabulka s obsahem
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
36
7.2.8 Audio management
To setup your analog audio input, simply click on “ON PRELIST”, if you have a Preview output,
the audio input will be played on it. Then adjust the GAIN from .
A red indicator light will be displayed if you reach the input clip. If the input clip light is being
illuminated, it means that the input gain is too high and the signal is being distorted. To solve this
issue, decrease the gain value. The 0dB corresponds to a signal in input.
The gain manual adjustment is only available for analog input.
For every input, you have the possibility to set up your source as a mono audio or stereo audio
source.
You have the possibility to adjust the level vs right level using the Pan knob.
All input sll have their own level which is 0 by default, decrease or increase the value to modify
the sound level:
all digital sources will have their sample rate displayed,
on SDI source you can choose 2 channels on one of the 4 groups.
The available audio output controls depend on the device setup
conguraon. As you are in matrix mode, you will have 2 programs
audio outputs.
For the audio output, you will nd:
this seng will help you to calibrate the
analog audio output component. Depending on the device you will
use aer the analog way device, adjust carefully the analog gain.
Basically, for a 0 level, the default value is 4 dBu.
it indicates the level of your input. On its right, a
bar will move up and down to indicate the audio level in real me. A
red buon will turn on if the maximum level is reached.
the delay can be automacally calculated
or manually adjusted. To adjust it manually, rst disable the Auto
buon.
- USER MANUAL 1
- THANK YOU 3
- 1. TRADEMARKS 6
- 2. INTRODUCTION 6
- 3. TERMS AND DEFINITIONS 7
- 4. HARDWARE SPECIFICATIONS 8
- 4.1.2 French 9
- 4.1.3 Italian 10
- 4.1.4 German 11
- 4.1.5 Spanish 12
- 4.2 13
- 4.3 13
- 4.5 14
- 4.5.2 Supported video formats 15
- 4.6 16
- 4.6 Input specicaons 17
- 4.7 18
- 4.8 19
- 20
- 4.10 21
- 5. CONNECTING THE QUICKMATRIX 22
- 5.1.2 Front panel 23
- 6.1 24
- 6.2 24
- 6.2 Connecng with the RCS² 25
- 6.3 26
- 7.1 27
- 7.2 Setup 27
- 7.2.2 Audio 28
- 7.2.4 Misc 29
- 7.2.5 Output management 30
- 7.2.6 Input management 31
- 7.2.6 Intput management 33
- 7.2.7 Frame management 34
- 7.2.8 Audio management 35
- 7.2.9 Service management 37
- 7.3 Edit 38
- 7.3.2 Layer adjustments 39
- 7.3.3 Eects 40
- 7.4 Live 43
- 8.1 45
- 8.2 46
- 8.2.4 Output selecon sengs 47
- 8.2.8 Layers with transions 50
- 8.2.12 Creang presets 51
- 54
- 54
- 8.2.16 Special features 55
- 57
- Layer2 57
- Layer1 57
- 8.3 Menu tree 58
- OUTPUT1 / OUTPUT2 58
- CHANNEL 1 63
- CHANNEL 3 63
- CHANNEL 2 63
- CHANNEL 4 63
- KEYING/TITLING 69
- SCREEN SETTINGS 70
- HORIZONTAL FROM CENTER 72
- FROM BOTTOM LEFT CORNER 72
- FROM BOTTOM RIGHT CORNER 72
- 9. MAINTENANCE AND SUPPORT 81
- 10.1 HDCP 82
- 11. WARRANTY 83
- 12. CONTACT INFORMATION 84
- 13. APPENDICES 85
- QMX150-03/31/2014 87
Související produkty a manuály pro Příslušenství komunikace Analog-way QuickMatriX
(4 stránky)Pyle Reproduktory uživatelské příručky
Začínající na P
Komentáře k této Příručce